Small Coffee Grinding Machine with Water Cooling System

For spices, herbs, grains etc. powder grinding milling 

Power: 2.2kw 

Capacity: 20-50kg/h 

Final size: 10-200mesh

water cooling system optional

  • Description
  • Inquiry

Small Coffee Grinding Machine with Water Cooling System

Introduction of Small Coffee Grinding Machine with Water Cooling System:
This small coffee grinding machine with water cooling system is add cooling based on the grain mill, can largely extend the continuously working time, while keep the raw material flavor at same time.

Features of Small Coffee Grinding Machine with Water Cooling System:
1. The grinder is made of high-quality SUS304, casting and precision processing, beautiful and elegant, never rust, in line with GMP requirements.

2. More hygienic:
(1) Four strong magnets are installed to absorb the iron powder worn by the grinding disc during the operation of the machine, which is clean and hygienic;
(2) No need lubricating oil in the milling chamber, which will not pollute the processed materials, ensuring the safety and hygiene of food and medicine.

3. Low noise,  smooth feeding, while no blocked, and the grinding is fine and dust-free.

4. Continuously feeding, high efficiency. 

5. The operation is simple and convenient.
(1) Only need to put the moving grinding disc on the coupling, and gently rotate it to install the moving grinding disc.
(2) When operating the machine, it is easier to adjust the thickness of the grinding powder.
(3) There is less material left in the grinding chamber.
(4) Feeding speed and fineness can be adjusted.
6. Wider application.

7. Gasoline type optional. 

8. Desk top cabinet optional. 

Working notice of Small Coffee Grinding Machine with Water Cooling System:
1. The drier the material, the finer it can grind.

2. The pulverizer needs to be fixed on a stable table to minimize vibration and noise.

3. During the processing, if the machine suddenly stops due to power failure, etc., must remove the residual materials before it can be started again.

4. If the machine parts worn or damaged, should repair or replace in time.

5. Pay attention to the amount of feed to prevent the motor from overloading the machine.

6. After use of the machine, should clean the inside of the machine and ventilated to dry.

7. When the machine is not used for a long time, the external power supply should be cut off. 

Technical data of Small Coffee Grinding Machine with Water Cooling System:

Model

PowerCapacityFinal size

Dimension

Weight

RT-860B

3KW30-60KG/H20-200Mesh

570*270*450MM

55KG

RT-860C includes water pump, cabinet

700*400*1060MM

65KG